Select Series™ 5mm, Ultra-Precision NMR Tubes, 5 Pack

• 5mm
• 600MHz 
• 7 Inch (178mm)
• Ships with Economy Cap. NorLoc™ Caps Sold Separately.

Our “Select Series™” NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass. 

Key properties that make this glass type desirable for NMR are its high degree of thermal shock resistance and low expansion coefficient. This allows for a greater margin of safety from breakage when used in variable temperature applications and freeze/thaw cycling, or under any other application where large temperature variations are required in the experiment. 

Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology. 

Economy NMR Tube Caps, 100 Pack
Our economy NMR tube caps are now available in 12 different colors for better solvent labeling capabilities.

• 3mm
• Red

Economy NMR Tube Caps, 100 Pack
Our economy NMR tube caps are now available in 12 different colors for better solvent labeling capabilities.

• 5mm
• Red
• Ethylene-Vinyl Acetate

5mm, Thin Wall, Natural Quartz NMR Sample Tubes, 5 Pack
Recommended for Boron NMR [< 0.1 ppm Boron] and/or UV catalyzed reactions in the region above 210nm [90%T @ 210nm]. Medium and heavy wall NMR tubes are now available, in addition to standard, thin wall NMR tubes.

• 5mm
• 500MHz
• Thin Wall
• 7" (178mm)

Suprasil® Quartz NMR Sample Tubes, 1 Pack

• 5mm
• 500MHz
• 7" (178mm)

Recommended for Boron NMR [< 0.01 ppm Boron] and/or UV catalyzed reactions in the region above 190nm [90%T @ 190nm].

Optimizer Inserts™ for 5mm Spinner Turbines

• For Adapting 3mm tube to 5mm Bruker Spinner Turbine

Precision adapter, made from a proprietary formulation of acetal homopolymer resin, holds 1.5mm, 1.7mm, 2.0mm, 2.5mm, 3mm, 4mm or 4.25mm NMR tubes in 5mm spinner turbine. Available for Agilent/Varian, Bruker & JEOL spectrometers. Does not include spinner turbine.

Fluoropolymer Liner Tube Kits for 29Si and 11B

Includes:

• 2 O-Rings
• 1 Open-Ended 5mm Tube

For Silicon and Boron NMR, we recommend the use of either TL-5-TUBEKIT for 5mm probes or TL-10-TUBEKIT for 10mm probes. Kit is designed for either Varian, Bruker, or JEOL spinners as a holding device for the fluoropolymer liner. Probe only “sees” fluoropolymer, allowing for excellent 29Si and 11B spectra.

Fluoropolymer Liner Tube Kits for 29Si and 11B

Includes:

• 2 O-Rings
• 1 Open-Ended 10mm Tube

For Silicon and Boron NMR, we recommend the use of either TL-5-TUBEKIT for 5mm probes or TL-10-TUBEKIT for 10mm probes. Kit is designed for either Varian, Bruker, or JEOL spinners as a holding device for the fluoropolymer liner. Probe only “sees” fluoropolymer, allowing for excellent 29Si and 11B spectra.

5mm Valved NMR Tubes for Intermediate Pressure, 1 Pack

• 5mm
• 500MHz
• 7" (178mm)
• Thin Wall

This valve incorporates an advanced seal design that is superior to alternative valves currently available from other manufacturers. A fluoroelastomer o-ring imparts resilience and a high degree of chemical resistance. A PTFE sheath, forming the primary seal, completely covers the fluoroelastomer o-ring, creating the ultimate barrier against aggressive, reactive substances while providing a totally inert surface.

These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.

We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).

5mm Valved NMR Tubes for Intermediate Pressure, 1 Pack

• 5mm
• 600MHz
• 7" (178mm)
• Thin Wall

This valve incorporates an advanced seal design that is superior to alternative valves currently available from other manufacturers. A fluoroelastomer o-ring imparts resilience and a high degree of chemical resistance. A PTFE sheath, forming the primary seal, completely covers the fluoroelastomer o-ring, creating the ultimate barrier against aggressive, reactive substances while providing a totally inert surface.

These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.

We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).