Fluoropolymer Liner Tube Kits for 29Si and 11B

Includes:

• 2 O-Rings
• 1 Open-Ended 10mm Tube

For Silicon and Boron NMR, we recommend the use of either TL-5-TUBEKIT for 5mm probes or TL-10-TUBEKIT for 10mm probes. Kit is designed for either Varian, Bruker, or JEOL spinners as a holding device for the fluoropolymer liner. Probe only “sees” fluoropolymer, allowing for excellent 29Si and 11B spectra.

5mm Valved NMR Tubes for Intermediate Pressure, 1 Pack

• 5mm
• 500MHz
• 7" (178mm)
• Heavy Wall

This valve incorporates an advanced seal design that is superior to alternative valves currently available from other manufacturers. A fluoroelastomer o-ring imparts resilience and a high degree of chemical resistance. A PTFE sheath, forming the primary seal, completely covers the fluoroelastomer o-ring, creating the ultimate barrier against aggressive, reactive substances while providing a totally inert surface.

These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.

We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).

The NORELL® NorLoc™ Generation II Security Cap™

• 5mm
• Sea Glass
• 100 Pack
• Patented Design Elements Allow Safe & Secure Closure

The standard 5mm and 3mm NMR tube cap designs have existed for decades. Many users can attest to  the significant flaws inherent in the traditional NMR tube caps, especially when faced with the chore of capping numerous sample tubes.  

NorLoc™ Caps work well with any NMR tube but are best when paired with Secure Series™ NMR sample tubes from Norell®. Internal components of NorLoc™ caps engage with the security band printed on our Secure Series™ NMR tubes and indicate one of two stages of closure. 

The NORELL® NorLoc™ Generation II Security Cap™

• 3mm
• Lemon Yellow
• 100 Pack
• Patented Design Elements Allow Safe & Secure Closure

The standard 5mm and 3mm NMR tube cap designs have existed for decades. Many users can attest to  the significant flaws inherent in the traditional NMR tube caps, especially when faced with the chore of capping numerous sample tubes.  

NorLoc™ Caps work well with any NMR tube but are best when paired with Secure Series™ NMR sample tubes from Norell®. Internal components of NorLoc™ caps engage with the security band printed on our Secure Series™ NMR tubes and indicate one of two stages of closure. 

Secure Series™ NMR Tubes 25 Pack

• 5mm
• 300MHz 
• 7 Inch (178mm)
• Includes “Norloc™ with Security Band” Caps
• A patented proprietary surface treatment with a unique textured surface ensures precise and positive retention in Bruker, Agilent/Varian, and Jeol spinner turbines.

The Secure 55 Series™ NMR tubes are made from ASTM Type I Class B borosilicate glass ("high expansion" borosilicate glass such as Kimble N-51A or equivalent) and parallel the properties of the Standard Series™ NMR tubes from Norell®

Secure Series™ NMR tubes feature several patented design elements that add a superior level of sample containment and isolation, safeguarding the integrity of precious or critical NMR samples and assuring secure retention of the NMR tube in the spinner turbine.

Secure Series™ NMR Tubes ship with our patented NorLoc Caps™ featuring a Security Band™ that engages and locks into the NorLoc II Security Cap™, securely joining the cap to the NMR tube. 

3mm CODED CLOSED PORT BLUE HARBOR SAMPLE VAULT CAPS FOR AUTOMATED SAMPLE TUBE SYSTEM, 96PK - U.S. PATENT NO. 8,054,080

Select Series™ 5mm, Ultra-Precision NMR Tubes, 5 Pack

• 5mm
• 400MHz 
• 7 Inch (178mm)
• Ships with Economy Cap. NorLoc™ Caps Sold Separately.

Our “Select Series™” NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass. 

Key properties that make this glass type desirable for NMR are its high degree of thermal shock resistance and low expansion coefficient. This allows for a greater margin of safety from breakage when used in variable temperature applications and freeze/thaw cycling, or under any other application where large temperature variations are required in the experiment. 

Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology. 

Select Series™ 3mm, Ultra-Precision NMR Tubes, 5 Pack

• 3mm
• 800MHz 
• 7 Inch (178mm)
• Ships with Economy Cap. NorLoc™ Caps Sold Separately.

Our “Select Series™” NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass. 

Key properties that make this glass type desirable for NMR are its high degree of thermal shock resistance and low expansion coefficient. This allows for a greater margin of safety from breakage when used in variable temperature applications and freeze/thaw cycling, or under any other application where large temperature variations are required in the experiment. 

Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology. 

Standard Series™ NMR Tubes, 25 Pack

• 5mm
• 300MHz 
• 8 Inch (203mm)
• For Routine NMR

Our “Standard Series™” NMR tubes are manufactured out of ASTM Type 1 Class B glass, commonly referred to as N-51A. Applications that are suited for using this type of glass are routine NMR where samples are run under room temperatures with no thermal gradients. It is therefore not recommended to fuse this glass with standard vacuum manifolds and the like, since these are generally made out of Type 1 Class A glass. Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology.

Solid Screw-Cap NMR Tube Cap without Septum, 12 Pack
Compatible with 5mm or 10mm  Screw-Cap NMR Sample Tubes. 

• 8-425 Thread