Select Series™ 3mm, Ultra-Precision NMR Tubes, 5 Pack

• 3mm
• 200MHz 
• 8 Inch (203mm)
• Ships with Economy Cap. NorLoc™ Caps Sold Separately.

Our “Select Series™” NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass. 

Key properties that make this glass type desirable for NMR are its high degree of thermal shock resistance and low expansion coefficient. This allows for a greater margin of safety from breakage when used in variable temperature applications and freeze/thaw cycling, or under any other application where large temperature variations are required in the experiment. 

Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology. 

Select Series™ 5mm, Ultra-Precision NMR Tubes, 5 Pack

• 5mm
• 400MHz
• Flat Bottom Tube
• 7 Inch (178mm)
• Ships with Economy Cap. NorLoc™ Caps Sold Separately

Our “Select Series™” NMR tubes are manufactured out of ASTM Type 1 Class A glass, commonly referred to as Pyrex® 7740 (Corning), Duran® (Schott Glass), or Kimax® KG-33 (Kimble) glass. 

Key properties that make this glass type desirable for NMR are its high degree of thermal shock resistance and low expansion coefficient. This allows for a greater margin of safety from breakage when used in variable temperature applications and freeze/thaw cycling, or under any other application where large temperature variations are required in the experiment. 

Each NMR tube is checked for concentricity and camber specifications utilizing the latest computer technology. 

Fluoropolymer Liner Tube Kits for 29Si and 11B

Includes:

• 2 O-Rings
• 1 Open-Ended 10mm Tube

For Silicon and Boron NMR, we recommend the use of either TL-5-TUBEKIT for 5mm probes or TL-10-TUBEKIT for 10mm probes. Kit is designed for either Varian, Bruker, or JEOL spinners as a holding device for the fluoropolymer liner. Probe only “sees” fluoropolymer, allowing for excellent 29Si and 11B spectra.

10mm NMR Tube Septa, 100 Pack

• 10mm
• Color: White

These precision molded natural rubber septa for 5mm and 10mm NMR sample tubes seal against both the inner and outer surfaces of standard, thin wall NMR tubes, providing the ultimate protection for sensitive or reactive samples, isolating them from contact with air, moisture and other ambient contaminants.

This dual seal septum likewise protects personnel against exposure to samples that may pose health or safety hazards, while still allowing easy access through the septum, using a syringe, to add, transfer or retrieve samples from the NMR tube.

Sample Vault Series™ NMR Tubes, 96 Pack

• 3mm
• Up to 700MHz 
• 178mm
• Packed in Lots of 96
• Ships with Closed Port Sample Vault Caps

Sample Vault™ Series NMR tubes with Sample Vault™ caps (U.S. Patent No. 8,054,080), are engineered for a new generation of high-throughput lab automation systems, including the Bruker SampleJet. 

Our patented design incorporates a white band positioned on the NMR tube that aligns with the base of the cap, indicating a properly locked position. Together, our Sample Vault™ caps and Sample Vault™ tubes form an integrated closure system for fail-safe delivery of your sample into the magnet.

5mm Valved NMR Tubes for Intermediate Pressure, 1 Pack

• 5mm
• 500MHz
• 7" (178mm)
• Thin Wall

This valve incorporates an advanced seal design that is superior to alternative valves currently available from other manufacturers. A fluoroelastomer o-ring imparts resilience and a high degree of chemical resistance. A PTFE sheath, forming the primary seal, completely covers the fluoroelastomer o-ring, creating the ultimate barrier against aggressive, reactive substances while providing a totally inert surface.

These pressure tubes facilitate experiments requiring conditions such as pressurized inert atmosphere blanketing, addition of reactive gaseous reagents under pressure, containment of low boiling point solvents or samples at elevated temperatures, and so on.

We recommend that the maximum operating pressure should be limited to 600 kPa (6 bar, 87 psi) when using a thin wall pressure tube, up to 1200 kPa (12 bar, 175 psi) if using a heavy wall pressure tube. (Please see accompanying table for complete details).

Optimizer Inserts™ for 5mm Spinner Turbines

• For Adapting 2.5mm tube to 5mm JEOL Spinner Turbine

Precision adapter, made from a proprietary formulation of acetal homopolymer resin, holds 1.5mm, 1.7mm, 2.0mm, 2.5mm, 3mm, 4mm or 4.25mm NMR tubes in 5mm spinner turbine. Available for Agilent/Varian, Bruker & JEOL spectrometers. Does not include spinner turbine.

Secure Series™ NMR Tubes 5 Pack

• 3mm
• 500MHz 
• 8 Inch (203mm)
• Includes “Norloc™ with Security Band” Caps
• A patented proprietary surface treatment with a unique textured surface ensures precise and positive retention in Bruker, Agilent/Varian, and Jeol spinner turbines.

The Secure 33 Series™ NMR tubes are made from ASTM Type I Class A borosilicate glass ("low expansion" borosilicate glass such as Corning Pyrex® 7740 or equivalent) and match the properties of the Select Series™ NMR tubes from Norell®.

Secure Series™ NMR tubes feature several patented design elements that add a superior level of sample containment and isolation, safeguarding the integrity of precious or critical NMR samples and assuring secure retention of the NMR tube in the spinner turbine.

Secure Series™ NMR Tubes ship with our patented NorLoc Caps™ featuring a Security Band™ that engages and locks into the NorLoc II Security Cap™, securely joining the cap to the NMR tube. 

5mm, Extreme Series Level 3, Valved NMR Tubes for Extreme Pressure, 1 Pack

• 5mm
• 500MHz
• 7" (178mm) NMR Tube
• Heavy Wall
• For High Pressure

Ultimate Protection: Level 3 Level 3 incorporates additional chemical and solvent resistance over Level 1 and the traditional High Pressure Valved NMR Sample tubes, by the substitution of Kalrez® perfluoroelastomer o-ring(s) in place of the standard fluoroelastomer o-rings. Kalrez® perfluoroelastomer o-rings offer the ultimate level of physical and chemical resistance with the inclusion of a secondary, backup o-ring.

The Extreme Series remains similar in function, use and pressure capability to the traditional High Pressure Valved NMR Sample Tubes, but the PTFE fluoropolymer valve plug has been upgraded and improved by changes to the design of the o-ring seal.  

The Extreme Series line consists of two categories: Level 1 and Level 3. Both levels incorporate a certain higher degree of valve seal integrity to guard against leakage or pressure loss due to o-ring failure caused by wear or other physical damage, and / or deterioration or damage caused by chemical exposure.